Field help (PKC)

Use this field to inform warehouse staff of any actions that apply when this component is picked for issue. You can select one of the following values:

• Component not weighed on weighing stations – the field Setup level (field LEVSET) and the Weighing tolerance +/- (%) fields (fields ITMTOLPOS/ITMTOLNEG) are disabled.
• Component weighed on weighing stations
• Component weighed in production
• Excipient phase on weighing stations
• Excipient phase in manufacturing
• Final work order excipient phase on weighing stations
• Final work order excipient phase in manufacturing
• Material correction on weighing stations – the Setup level field can be blank.
• Material correction in manufacturing – the Setup level field can be blank.
• QFS at end of manufacture – 'QFS' equates to the term 'Quantum Satis' meaning 'Add as much of this component as is needed to achieve the desired result, but not more.'. You might use it, for example, if this component is used to compensate for weight differences in other components or as an additive to achieve a specific weight. This value is especially relevant within the pharmaceutical and food industries.

The list of values available for selection are defined in Local menu 2328 - Code to serve.

 The value you set for this field directly impacts entry of the weighing tolerances. See the field Setup level (field LEVSET).

 This field is only available if the MWM-Weighing station activity code is active.

 If you assign the value 'Component not weighed at station' this component cannot be used with the Weighing module; if you have assigned the routing operation code 900 to this component line, then this component must be weighed.