Safety instructions
This table is used to specify the safety instructions to be complied with during ground transport (ADR, RID and ADNR regulations).
The purpose of safety instructions is to define the following parameters for a pair (transport category, hazardous material class, classification code, packing group) within the framework of hazardous materials:
- the numbers of label plates no. 1, no. 2 and no. 3 to be affixed on the truck.
- the transport coefficient to be taken into account.
All these data will enable the DCMD ("Dangerous Substance Transport Document) to be printed during shipment.
Prerequisites
Refer to documentation Implementation
Screen management
To define a safety instruction to be applied to a transport category, a hazardous material class, a classification code and a packing group, the various fields must be entered in a grid.
Entry screen
Fields
The following fields are present on this tab :
Grid
|
|
|
|
| This field specifies the classification code of the hazardous product. |
| This field indicates the packing group of the hazardous product. There are 3 possible packing groups: I, II or III. |
|
|
| This field specifies the safety instructions that will be associated with the transport of a hazardous substance for the triplet (transport class, classification code, packing group). |
|
|
| This field mentions the number of the no. 1 label panel (related to the safety instruction) that may have to be affixed to the truck about to leave. |
| This field mentions the number of the no. 2 label panel (related to the safety instruction) that may have to be affixed to the truck about to leave. |
|
|
| This field specifies the danger coefficient (linked to the safety instruction) that will be taken into account to establish the DCMD (Dangerous Substance Transport Document). |
Close