There can be, at most, one division rule by site.
Prerequisites
Refer to documentation Implementation
Screen management
Entry screen
The following fields are present on this tab :
Block number 1
|
  | - Description (field CUTAXX)
|
  | |
  |
BC division rules
|
In this field, specify the format type of the BC. The fields of the Separator and Fixed length blocks are available depending on the type of format selected and on the fields that can be subject to a recheck. These are the fields defined at the level of the parameter ITMCTL - Product recheck (weighing)(Manufacturing chapter, WEI group): Product code and/or Lot code and/or Sub-lot code. - If the BC format is of type Fieldseparator, specify:
- the numbers of the fields contained in the BC, - the character used as a separator. - If the BC format is of type Fixed length, specify:
- the length of fields, - the start position of each fields contained in the BC. The end position is calculated automatically.
| - Blank deletion (field SUPBLC)
|
Check this box to indicate that the blanks present in the recovered fields (product, lot) must be deleted. |
Separator
- Product code: field no. (field NUMITM)
|
  | - Separating character (field ITMSET)
|
  | - Lot code: field no. (field NUMLOT)
|
  | - Separating character (field LOTSET)
|
  | - Sublot code: field no. (field NUMSLO)
|
  | - Separating character (field SLOSET)
|
  |
Fixed length
- Product code: field length (field ITMLON)
|
  | - Start position (field ITMDEB)
|
  | - End position (field ITMFIN)
|
  | - Lot code: field length (field LOTLON)
|
  | - Start position (field LOTDEB)
|
  | - End position (field LOTFIN)
|
  | - Sublot code: field length (field SLOLON)
|
  | - Start position (field SLODEB)
|
  | - End position (field SLOFIN)
|
  |
Error messages
The only error messages are the generic ones.