Transportation note type

• Type (field TNHTYP)

Alphanumeric Code used to identify the type of delivery.

• Legislation (field LEG)

In creation mode, the legislation code can be initialized via the user parameter LEGFIL - Legislation (selection filter) (SUP chapter, INT group). You can also use this parameter to filter the selection panel and only display the codes defined for this legislation and those defined for ‘All legislations’.
The legislation code is not mandatory. When the code is entered, you can only use the delivery type for companies subject to this legislation.

Reminder of the main principles relating to the use of data or a setup element defined by legislation, when the company context is known (record, flow, etc.)

• When a setup element is defined for a legislation, it can be used only when the legislation of the context is identical.
  It cannot be used in a record set up with another legislation.
  
• When a setup element is defined without a legislation (‘All legislations’ level), it is considered as having a multilegislation nature. This element can be used in every record, irrespective of the legislation, unless there is a setup element with the same code, defined for the company legislation. In that case, the setup element defined for the company legislation is the only one submitted for selection and accepted on entry (provided it is ‘Active’).
  Notes:
• If the setup element defined for the company is not ‘Active’ and the setup element defined at the "All legislations" level is, this setup element cannot be used.
• To reduce the processing time and thus improve performances, we recommend not to create multilegislation records and instead create records for each legislation of the folder.
  For further information, refer to the documentation on Performance improvement: List of the multilegislation objects.
  
• An additional filter is applied on the setup element depending on the company group defined. This setup element can only be used and is only suggested for selection if the company to which the record is associated, belongs to this company group.

Example 1:
Setup of invoice type as follows:

An additional filter is applied depending on the company group entered.
If, in the example above, a company group is also specified at the level of the FAF invoice type setup with the FRA legislation, this invoice type is suggested for selection only if the company belongs to the company group entered.

Example 2:
Setup of invoice type as follows:

• Description (field DESAXX)

This long description is used as a title in screens and reports.

By default the short title, the long title or the column header of a data are recorded (on creation/update) in the connection language of the user.
You can add your translation in another language using the Translation function:

• Click Translation from the Actions icon in the corresponding field.
• In the Translation window, add a new language code with the translation in this language.

A user who logs on with this language will view the short description, long description or column header in their connection language if a translation exists. Otherwise, these descriptions will be available in the folder language.

The connection language must be defined as a default language for thefolder.

• Short description (field SHOAXX)

Short title used in the screens and reports. This title is recorded in your connection language.

By default the short title, the long title or the column header of a data are recorded (on creation/update) in the connection language of the user.
You can add your translation in another language using the Translation function:

• Click Translation from the Actions icon in the corresponding field.
• In the Translation window, add a new language code with the translation in this language.

A user who logs on with this language will view the short description, long description or column header in their connection language if a translation exists. Otherwise, these descriptions will be available in the folder language.

The connection language must be defined as a default language for thefolder.

• Group (field GFY)

By entering a company group, you can limit the scope to companies in the selected group only. When this data is used for another record or with a setup element also defined in the group, a control checks that the groups have at least one company in common when the groups are different.  

In addition, a consistency check is performed for the legislations of the companies in the selected group.
At least one of these companies must have the same legislation as the one entered in the Legislation field. If  not, a warning message displays.

When using the document type, a consistency check is also performed between the legislation/group of the document type and the legislation/group of the document.

 For further information, click here.

• Manual sequence no. (field MANCOU)

This information is used to specify whether the document number can be entered manually.

• If this field is set to 'No', the number can only be assigned automatically.
• If it is set to 'Yes', the number can also be entered. If it is not entered, a number will be assigned automatically by the counter upon creating the document.

• Update document date (field DATUPDFLG)

• Sequence number (field CODNUM)

The counter code associated to the defined type of delivery must be entered, whether the number allocation is automatic or manual.
It is therefore recommended to have previously defined a sequence number counter in the Sequence Numbers table (that can be accessed by tunnel from this field).

When the counter is used for the Portuguese legislation, the sequential number is applied to the document when it is subject to the electronic signature and SAFT-PT (Standard Audit File - Tax) payment processes. The parameter entitled PORDKS-Electronic signature Portugal(LOC chapter, POR group) must be set to: Yes, and the DKS-Electronic signature must be active.
The counter must have the following structure:

• The first component must be a constant component type. Its value must be equal to:
  - the code of the sequential number code that may contain or not the PT abbreviation,
  - the value of the original type of document. This value must match with the constant one, the “-“ character is optional.
  Example: invoice type FCL has associated the PTFCL counter and the FCLconstant.
• The second component must be the company code or the code site, if the counter is defined at the company level or at the site level.
• The third component should correspond to the year or the fiscal year, if the counter is set at the year or fiscal year level. It is strongly recommended that you do not use the month or the period within the framework of the electronic signature.
• The fourth component must be a constant type with the ' / ' value.
• The fifth component must be a sequential type one.

Between the first and the penultimate component, the complement can be used as an option. Although, the complement is mandatory for purchase auto-invoices. If the structure is not properly defined, a blocking error will occur once the document is validated or signed.

• Final sequence no. (field CODNUMEND)

This field can only be viewed if the following conditions are met:

• The KPO - Portuguese localization activity code is active.
• the legislation code of the return type is empty or is set to: POR.

You can indicate here a final sequence number, it must be different from the main sequence number. This sequence number is used upon delivery validation, in order to assign a new number to the delivery.
The SDHENDNBR - Final delivery sequence No. parameter must be set to: Yes. If this parameter is set to: Yes but no final sequence number is specified, the final sequence number specified in the Sequence number assignmentstable for Final deliveries will be taken into account.
The former number is no longer displayed but it is still recorded in a specific field (TMPSDHNUM) in the delivery table.

When the counter is used for the Portuguese legislation, the sequential number is applied to the document when it is subject to the electronic signature and SAFT-PT (Standard Audit File - Tax) payment processes. The parameter entitled PORDKS-Electronic signature Portugal(LOC chapter, POR group) must be set to: Yes, and the DKS-Electronic signature must be active.
The counter must have the following structure:

• The first component must be a constant component type. Its value must be equal to:
  - the code of the sequential number code that may contain or not the PT abbreviation,
  - the value of the original type of document. This value must match with the constant one, the “-“ character is optional.
  Example: invoice type FCL has associated the PTFCL counter and the FCLconstant.
• The second component must be the company code or the code site, if the counter is defined at the company level or at the site level.
• The third component should correspond to the year or the fiscal year, if the counter is set at the year or fiscal year level. It is strongly recommended that you do not use the month or the period within the framework of the electronic signature.
• The fourth component must be a constant type with the ' / ' value.
• The fifth component must be a sequential type one.

Between the first and the penultimate component, the complement can be used as an option. Although, the complement is mandatory for purchase auto-invoices. If the structure is not properly defined, a blocking error will occur once the document is validated or signed.

• Record type (field RECTYP)

This field is displayed only when the KPO activity code is active.

The type of document is necessary so that it can be possible to assign to it a dedicated sequence number.
It can take the value :

• Normal
• Manual document recovery
  This means that the source document has been generated manually in paper form (as the system was unavailable).
• Backup document recovery
  This means that already recorded documents have been lost due to the restoring of a backup. These are documents recorded between the time when the backup has been performed and the time when the backup has been restored.
  It will be necessary to create them again manually.
  For these two types of documents, it will be necessary to enter the original document number in the transaction (ORIDOCNUM field -Original document no. for invoices and MANDOC -Manual document, for the other types of documents).
• External document
  This means that the document was originally created in another software, which has provided the electronic signature. No electronic signature will be generated by Sage X3 for this document type.

 The document number which is entered must be unique.

• SAF-T document type (field SAFTTRNTYP)

This field will determine the available document type in order to distinguish the several document types allowed by SAFT.