Auto palletization
This function is used to validate/cancel all or part of a SU in a palletization order (PAO).
Principle: after having selected a PAO and/or a SU and/or parcels, the system suggests to validate one by one the palletization of parcels in a SU (the user scans the parcel, then the SU). When the SU has been palletized, the user is asked whether they wish to close this SU. In the affirmative, they are requested to validate the size/weight of the SU.
This function belongs to the prepalletization functionality available from version Pemium.
Prerequisite
Refer to documentation Implementation
Screen management
The sequencing of the tabs depending on the keys used is the following:
Tab | The OK button | End button |
PAO no. | Address | Menu |
Address | Address | PAO no. |
SU | PAO no. | PAO no. |
Tab PAO no.
Specify a PAO no. and/or a SU no. and/or one (or more) parcel(s) no.
PAO no.
- optional field
- Specify a non-validated PAO no. (status = 4)
submits the corresponding PAOs.
SU no.
- optional field
- Specify a non-validated SU no. (status = 4); If the PAO no. is entered, the specified SU must be one of those belonging to the PAO.
submits the corresponding SUs.
Parcel no.
- mandatory field if the PAO no. and SU no. have not been previously entered
- specify a non-validated parcel no. (status = 4); If the PAO no. and/or SU no. have been entered, the specified parcel must be one of those belonging to the PAO and the SU.
submits the corresponding parcels.
It is possible to select one or several parcels from a PAO or a SU and to assign to each parcel a number identifying its situation in the palletization area. For that purpose, enter as many times as necessary the Parcel no. and Situation fields, followed by This selection phase of parcels to be palletized comes to an end upon entry of the Parcel no. with blank, followed by if at least one parcel is selected.
Situation(/Number of selected parcels)
- enterable if the Parcel no. has been entered
- either all the selected parcels must have a situation, or none
- 0 corresponds to the absence of any situation, it suggests erasing the situation of the previously selected parcels
- several selected parcels cannot have the same situation; it is possible to modify the situation of a previously selected parcel.
Tab Address
Principle: the parcel no. to be palletized is scanned, then the SU no. where the parcel must be repositioned.
Parcel no.
- mandatory field
SU no.
- mandatory field
Tab SU
Size (H x W x D)
- enterable or not according to the SU type
- mandatory fields only when closing a SU.
Weight
- enterable or not according to the SU type
- mandatory fields only when closing a SU.
suggest to close the SU.
In the event where the SU is not closed, the SU weight, size and volume are modified.
In case of closing, the SU moves to the 'pending loading' status (status 7), the pending shipment status (status 8) or the shipped status (status 9), depending on the management options.