Sub-contract transfers
Use this function to intervene on a stock line or a group of stock lines. You can thus transfer stock to a supplier location.
The functionalities to be covered by the function are determined by the choice of a stock change transaction of the ‘subcontract transfer’ type that can be set up.
A Subcontract transfers function is also available in VT mode. This function, accessible from a virtual terminal, is used to create subcontract transfer transactions and launch the printing of labels automatically.
Prerequisites
Refer to documentation Implementation
Screen management
Entry screen
Presentation
When entering the Sub-contract transfers function, the user must choose a transaction from those set up.
TheSub-contract transfers function is used to transfer stock to a supplier-type location. See the documentation on Location types for further information.
A transaction performing transfers to a supplier cannot be used for internal movements or inter-site transfer movements simultaneously.
Selection block
The subcontract transfer is performed on a specific note. A same note can group subcontract transfers for several products. It is however necessary to select the stock lines to be modified product by product. The Product field of the Selection header block acts as a filter for stock lines to be moved.
Target block (only available for internal changes)
When intervening on a stock line, you can enter a status and a target location to be applied during the selection. This is significant for mass stock changes. You can, for example, select the stock lines from a location A and specify that for all these lines, the target location is B.
Stock lines block
The Subcontract transfers function is used to intervene on a stock line or a group of stock lines. These stock lines have to be selected by picking in the case of a mass inter-site transfer. They are shown in the Stock Selections panel. The stock lines are displayed in this selection panel only if a sub-contractor code and a product have been entered in the dedicated fields.
The stock lines selected in this way generate lines on sub-contractor transfer note.
Selection of stock lines
The Stock selection panel is loaded with all the stock lines of the product. These lines can be filtered in order to reduce their number and specify the additional filters in the dedicated window, activated using the Picking criteria button.
The selection is made by picking the displayed lines either one by one or as a group of lines. The selection of a group of lines is made by picking the first line to be selected and the last amongst the lines shown in the selection panel whilst holding the Shift key down: all the lines contained between these two lines are then selected. To select several groups of stock lines, the Control and Shift keys need to be used.
The stock quantity selected on a line is limited to the available quantity for this stock line (the available stock for each line is shown in the Stock lines selection panel).
Exception for products managed by serial numbers: the picking of serial numbers to be modified can be carried out in several ways:
- by a multiple selection of consecutive serial numbers in the selection panel: the system aggregates on a single slip line the group of selected consecutive serial numbers,
- by selecting line by line the serial numbers to be processed:the system only aggregates serial numbers if the line by line selection is made in consecutive serial number order. As soon as the sequence is broken, the system creates a new slip line.
Sub-contract transfer
The lines on the created slip show, according to the setup of the selected stock change transaction, the source stock information and the targetstock information.
According to the role of the transaction used, it is possible to change the target information in order to specify the quantity to be processed, the target location, the target status, the target unit, or the movement description either directly on the document line or via the Stock change sub-contract transfer Detail entryscreen if the selected stock must be distributed between several locations, or with several statuses or several units.
When creating the slip, the system generates as many stock movements as there are modified stock lines.
It is not possible to modify a created sub-contract transfer: to modify a previous movement, it is necessary to carry out a movement in the opposite direction. Nevertheless, the detail of the modifications made can be viewed by clicking Movement inquiry from the Actions icon on the slip line.
Transfer to supplier
TheSub-contract transfers function is used to transfer stock to a sub-contractor supplier. You must use a transaction that manages this transfer type. These types of transactions contain a specific selection panel.
A single supplier transfer note can only concern a single sub-contract supplier at a time, the supplier being assigned in the selection panel.
- If the entered supplier is also defined as a customer, with one or several ship-to customer addresses, then entering a delivery address gives specifications on the ship-to customer and the subcontract location defined for this customer. The sub-contract location field in the stock transfer note is automatically loaded and can no longer be modified. If no location exists for the ship-to customer, the sub-contract location field of the transfer note can be manually entered.
- If the supplier is not defined as a customer, the system searches the location attached to the supplier (Commercial tab in the Supplier record): this location will be the target location. If no location has been defined for the supplier, it is necessary to enter the target location for the transfer in the stock transfer slip header.
The target location of a transfer to a supplier must be of the sub-contractor type, in this way the stock transferred to a sub-contractor is not confused with the internal physical stock.
When a product transfer is managed in serial number on issue, serial numbers are assigned.
It is possible to bring back stock from the supplier, using the transaction type Sub-contract return.
Close
Fields
The following fields are present on this tab :
Block number 1
| The storage site is initialized by default with the site linked to your function profile. |
|
|
|
|
| Enter the entry number. |
| This is the description of the document. |
| Date utilisée à la comptabilisation du mouvement. Elle est initialisée avec la date du jour et peut être changée pour une date antérieure, si la date sélectionnée se situe dans une période ouverte du calendrier comptable.
|
| Project reference that you associate with the stock movement. This project code will be stored in the PJT field in the STOJOU and STOCK tables if it was indicated in the document header. |
| Movement group, initialized by the movement group of the transaction being used. Statistical information used in the stock transactions associated with the shipment. This value is fixed if the original document does not reference a movement group. Otherwise, the movement group of the document at the origin of the quality control is suggested in priority. |
Intersites
| The name (title) of the production site. |
| This field is only useful in an inter-company context. In this case, the purchase site is loaded by default with the destination site, if it is a Purchase-type site. When this is the case, the system assigns the first Purchase-type site of the destination company.
|
| This is the default address code for the receiving site chosen. This address will be printed on the order document sent to the supplier. |
| This field specifies if the transfer is an inter-company transfer. It is not available for modification. |
| The sales site must be part of the same company as the start site. |
| This is the invoice number. |
| This is used to indicate whether the transfer must be invoiced or not. |
Subcontract
| Enter the supplier at the origin of the receipt. The selection lists specific to the intersite and intercompany orders and deliveries available for receipt are filered to those related to the entered supplier. From the Selection icon, you can:
|
| Sub-contractor address to which the transfer will be made. |
| In this field, enter a location by subcontract supplier address (where the supplier is defined as a customer). This location must be of the Sub-contractor type and will be used for sub-contractor deliveries.
|
Selection
| This field is used to select the product. Selection start and end ranges must be entered for the product reference. |
| The display of this field depends on the setup of the entry transaction used. |
| The presence of this field is subject to the activity code WRH. |
| Reference of the location to be processed.
|
Destination
|
|
| The presence of this field is subject to the activity code WRH.
|
| This field can only be viewed for stock changes of the Internal type.
|
Stock picking
| This button is only available for Internal changes and when the entry transaction authorizes mass location changes. |
| This button is only available for Internal changes and when the entry transaction authorizes mass location changes. |
Grid Stock lines
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| This field indicates the quantity to be processed expressed in PAC.
|
|
|
|
|
| This field indicates the quantity to process, expressed in STK. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Enter a new packing unit of measure. |
| Enter the PAC-STK coefficient (packing and stock UoM). |
|
|
| The presence of this field is subject to the activity code WRH.
|
| Enter the new status. |
| Help common to every Stock change transaction screen Enter the license plate number used for the transfer. This field being available and the related management conditions (Displayed / Entered) are subject to the setup of the entry transaction used.
|
| The type of location towards which the transfer will be carried out. |
| This is the location towards which the transfer must be carried out. The presence of this field and its management conditions (Displayed / Entered) depend on the setup of the entry transaction at use. |
| No help linked to this field. |
|
|
| Use this parameter to save an analysis request to be processed by the Quality control function, in the event that the status has been entered with the 'Q' value. If the value of this parameter is "No", the switching of statuses to "A" or "R" cannot be performed in the Quality control function. It is necessary to use the Stock change transactions function. |
| Enter a free description that will be registered in all the stock transactions associated with the delivery line. |
| Order price. |
The analytical dimensions are initialized in compliance with the Default dimensions setup. Depending on the setup, they remain available for modification. |
Close
Action icon
Enter stock change detail
In stock movement entry, a stock line (or a set of stock lines for consecutive serial numbers) can be distributed into multiple locations, statuses or units. To do so, open a detailed entry window to distribute the quantity into the required stock data.
The detailed entry window is composed of a header and a stock lines grid.
- The header picks up the stock characteristics of the stock line to be changed (or the stock lines if consecutive serial numbers have been selected) as well as the quantity to be processed.
- The grid only picks up the destination stock information that the stock transaction plans to be modified as well as the quantity to be processed.
Within the header section of this window, under the [Options] button, it is possible to have access to the inquiry to view and potentially modify the analytical dimensions attached to the issue and receipt movements, however this is only in the case of an inter-site stock transfer note. In the case of transfer-to-supplier notes and of an internal stock change, analytical dimensions are not supported.
Invoice
Stock by Site
Close
Reports
By default, the following reports are associated with this function :
BONTRF : Transfer notes
This can be changed using a different setup.
- The BONTRF report is a standard report common to internal and external flows.
- Use the BONTRFEXT - External transfer notes report In order to print more detailed information, such as the Warehouse, Location/Location type, Identifier, Original status and Destination status.
Specific Buttons
This button activates a screen where it is possible to enter several filters: these filters are used to limit the stock lines that will be suggested in the selection panel of stock lines. |
Menu Bar
Options/Transaction
This function is used to view the setup of the subcontract transfer transaction being used.
Options/Dimensions
This function makes it possible to view and possibly modify the analytical dimensions attached to the note header. The analytical sections are not managed for the sub-contract transfers.
Transport note / Sending
Fields
The following fields are present on this tab :
Additional info
| Displays the departure date for this delivery or return. |
| Displays the arrival date for this delivery or return. |
| Delivery departure time. |
| Delivery arrival time. |
| License plate of the vehicle carrying goods. |
| Enter the trailer license plate. |
Manual document
| If the web service is down, the transportation note must be communicated using a paper document including the paper document number and the internal system number. This communication must be done directly in the AT portal. This field must contain a slash character (/) separating the sequential number specific to the series (on the left) and the sequential number itself (on the right). This is needed for all transportation notes for manual documents. |
Communication
| This field displays the AT code for the Transportation note returned by the tax authority. This field populates automatically when you communicate using the web service. If you communicated the transport using a manual document, you need to enter the code from the tax authority manually. |
Close