General parameters > Chapter Supervisor > Parameter WRKRMTMAC (Server:workstation workflow links) 

This parameter is used to define the server name and the port number of the Sage service in case of Workflow returns. If this parameter is not entered, it is the application and the service of the folder that are taken into account.

This parameter must be entered for a workflow recipient to answer directly by clicking in the e-mail without getting connected to X3.

In tab "Tracking" of the workflow rule setup, for each answer:

VAL, REJ, ..., a link is generated in the e-mail.

Example of an e-mail

To accept or refuse, click on one of the following links:

To accept: http://serveur_x3_web:port_x3_web/AdxWfC/action.jsp?...

To refuse: http://serveur_x3_web:port_x3_web/AdxWfC/action.jsp?...

Principle

The user clicks on one of the links.

The X3 Web Server then generates a file corresponding to the user's answer in directory WRKRMTDIR.

The AWRKSIG batch task must be a recurring one.

This task will check directory WRKRMTDIR, which is to be found on server WRKRMTMAC.

Example

WRKRMTMAC = x3_appliction_server_:x3_server_port 

 

 

Level of localization / Global variable

The parameter is defined at the level Folder.Belongs to Module SUP (Supervisor) and to Group WRK (Workflow),in which the following parameters can also be found :

The global variable GWRKRMTMAC is associated to it.

Linked parameters

The following parameters are linked to the parameter WRKRMTMAC  :

Supervisor

 WRKRMTDIR (defined at level Folder) : Workflow links directory

 WRKRMTHTTP (defined at level Folder) : Workflow links HTTP address