Stock > Assembly > Transfer (step 1) > Unit validation 

This screen is used to validate in part or in full an assembly transfer/replenishment, or to cancel it.

The transfer/replenishment movement includes a status to view the progress.

    Prerequisite

    SEEREFERTTO Refer to documentation Implementation

    Screen management

    The screen is comprised of a header part with the transfer order information, and a grid part with the grouped movements of the transfer order.

    Header

    Fields

    The following fields are present on this tab :

    Transfer number.

    • Date (field DAT)

     

    • Time (field TIM)

     

    • Wave no (field WAVNUM)

     

    • Type (field MVTTYP0)

     

    Close

     

    Tab Grouped movements

    Fields

    The following fields are present on this tab :

    Grid

    • Select (field SEL)

    No help linked to this field.

    • Action (field TYPACTFLG)

     

     

     

     

    • Ctrl code (field ORICTLCOD)

    A location control code is requested if the current site, location and product set-up is activated.

    Validation will only be possible if the entered control code matches the expected control code (it can be viewed in the location record).

     

     

    • Ctrl code (field CTLCOD)

    A location control code is requested if the current site, location and product set-up is activated.

    Validation will only be possible if the entered control code matches the expected control code (it can be viewed in the location record).

     

    • CU/STK no. (field VALCUQ)

    Quantity to be validated or cancelled expressed in CU.

    • STK (field UOMSYM)

     

    • No. (field CTRQTY)

     

     

    • No. (field VALQTY)

    Quantity to be validated or cancelled expressed in homogeneous containers.

     

     

    • Lot no. (field LOT)

     

    • Reservation no (field RSA)

     

    • Support no. (field SPT)

     

    • FIFO (field FIFDAT)

     

     

    • Status (field TRFSTA)

     

     

     

     

    • Location (field OUTSRNLCZ)

     

    Close

     

    Action icon

    Check all
    Uncheck all
    Serial number entry

     

    Close

     

    Reports

    By default, the following reports are associated with this function :

     ETIQREA : Replenishment label

     REAPPRO : Transfers / Replenish

    This can be changed using a different setup.

    Specific Buttons

    Used to cancel a movement.

    Deleting an order, or the saving of an order, moves the movements to status 9-Cancelled.
    Pending output movements from the removal location and pending input movements to the repositioning location are cancelled. The stock objects are updated, as are the non-transferred quantities on the AO lines.

    Menu Bar

    Functions / Load analysis

    Error messages

    In addition to the generic error messages, the following messages can appear during the entry :

    Error on CU no. field

    The entered quantity is larger than the quantity of the totaled movements.

    Quantity not a multiple of the homogeneous quantity

    The entered quantity is not a multiple of the homogeneous level of the container of the stock object to be transferred.

    CU quantity to be cancelled > CU total – Pending output movements

    The replenishment movements to be cancelled is used in an output movement.

    Container missing from the palletization program

    The entered container does not belong to the palletization program of the movement input container.

    Operator code invalid.

    The entered operator code does not enable the transfers/replenishments to be validated. The authorizations granted to an operator can be viewed in the operator table.

    "Ctrl code" field error

    The entered control code does not match the expected control code. The value of the control code can be displayed on the location.

    Tables used

    SEEREFERTTO Refer to documentation Implementation