The screen consists of a single grid displaying the list of SUs to be processed (status 4 - not validated).
Entry screen
Presentation
In order to validate several SU records, it is necessary to tick the records to be validated in the grid, and to press button. The SUs, parcels and output movements are then validated, and the locations are updated.
The entry of a control code is completely prohibited when using this functionality, irrespective of the setup being used.
If the parcel requires serial numbers to be entered, the parcel unitary validation function will have to be used or the serial numbers will have to be entered before.
The entry of an operator code can be asked by the system. The output configuration setup of the current depositor has to be set up accordingly. The validation will only be possible if the entered operator code is authorized to validate pre-palletized SUs.
The entry of an SU characteristics may be demanded according to parameter "SU actual weight entry" of the output configuration. If an SU type is forced on the DO header, the latter cannot be modified.
If option "Parcel/SU validation: SU closure request" of the output configuration is ticked, and if the SU is validated, the system will ask the operator whether they wish to close the SU or not.
If the SU quay management is active and if the operator confirms the SU closure, the system will propose a destination quay location.
The cancellation of one or several SUs can be carried out by selecting the records and pressing button.
In case of SU total cancellation, the SU number is deleted. Of course, this also applies to the parcels it included. However, the cancelled output movements change to status 5 - Cancelled upon preparation.
A control is performed in the case of DO or DO line unauthorized partial delivery. It is possible to validate a movement and then to cancel, but it is impossible to cancel and then to validate.
It is used to select the SUs to be processed based on criteria SU type, wave number, PO number, DO reference.