Readdressing
This function allows the modification by PO the picking addresses determined by Warehousing during the launching of the waveor during the complementary PO launching; it is therefore, allowed to change the stock object as long as the imposed characteristics of the DO line in terms of quantities and qualitative information are respected.
Prerequisite
Refer to documentation Implementation
Screen management
The screen is made up of 3 tabs : a tab identifying the P.O, a tab listing the output movements of the P.O and a tab displaying the available stock objects to carry out the re-addressing.
Header
Presentation
This tab allows the selection of the PO to be re-addressed.
Close
Fields
The following fields are present on this tab :
| Preparation order number (sequence automatically assigned by the system). |
|
|
|
|
|
|
|
|
|
|
Close
Tab PO lines
Presentation
This tab presents the unitary output movement and not yet validated.
Each of the lines present the qualitative information of the DO line if it is present. The movement number is displayed on the last column of the.
On this screen, the user selects the output movement that he desires to re-address
Close
Fields
The following fields are present on this tab :
Grid
| No help linked to this field. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Close
Action icon
Tab Stock objects
Presentation
For each line ticked on the previous tab, this tab displays the available stock objects that can be picked in place of the one chosen by Warehousing.
To change the picking, key in the quantity in CU to be picked on each line.
If the only stock object displayed is the one to be picked, it means that the system can not find an available stock object corresponding to the characteristics of the DO lines
The displayed objects that can be selected have the following characteristics :
- They should be in a location not blocked in output, and/or not being inventoried, and/or whose store is allowed for output.
- They should have SBD, UBD, SbD dates greater than the date of the day. Also, the detention date should be less than the date of the day.
If the DO line has a container type and code different of level 5, only the objects of this container or those containers found on the palletization plan of the objects are displayed.
If the DO line has a stock nature, or a lot n° , or a support n°, the stock objects « to be selected » should have the same stock nature, the same lot n°, or the same support n°.
If the DO line has a reservation n°, the functioning depends on the preparation mode of the DO :
- If it is an exclusive reservation, therefore only the objects with the same reservation number can be picked.
- If the reservation is not exclusive, then the objects without reservation number and the objects with identical reservation number can be picked.
If the DO line has a FIFO date, the functioning depends on the preparation mode of the DO :
- If the FIFO date is exclusive, only the objects of the same FIFO date are displayed.
- If the FIFO date is not exclusive, the objects with FIFO date greater or equal to that of the DO line is displayed.
The quantity to be re-addressed and keyed in should be equal to that of the output movement.
Remark : in case of re-addressing the printing of the PO should be launched manually.
Close
Fields
The following fields are present on this tab :
Block number 1
|
|
|
|
|
|
|
|
| No help linked to this field. |
|
|
|
|
|
|
| Quantity expressed in CUs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Close
Action icon
Reports
By default, the following reports are associated with this function :
OP : Pick Order
This can be changed using a different setup.
Error messages
In addition to the generic error messages, the following messages can appear during the entry :
Sum of quantities not correct : X <> Y
The re-addressed quantity is different to that of the selected output movement.
0 stock objects selected
No stock object was selected for the re-addressing